RMS Technologies R325 DRIVER W/PDT - Manual (Page 18)

RMS Technologies Page 18 Version 1.21
R325 Single Axis Driver Manual 08/23/2007
Driver to Motor Cable AWG Table
1 Amp (Peak) 5 Amp (Peak)
Length (Feet) 10 25 50 75 100 Length (Feet) 10 25 50 75 100
Minimum AWG 20 20 18 18 16 Minimum AWG 16 16 14 12 12
2 Amp (Peak) 6 Amp (Peak)
Length (Feet) 10 25 50 75 100 Length (Feet) 10 25 50 75 100
Minimum AWG 20 18 16 14 14 Minimum AWG 14 14 14 12 12
3 Amp (Peak) 7 Amp (Peak)
Length (Feet) 10 25 50 75 100 Length (Feet) 10 25 50 75 100
Minimum AWG 18 16 14 12 12 Minimum AWG 12 12 12 12 12
4 Amp (Peak)
Length (Feet) 10 25 50 75 100
Minimum AWG 18 16 14 12 12
Driver to Motor Supply Cable Wire Size
NOTE: These recommendations will provide optimal protection against EMI and RFI. The
actual cable type, wire gauge, shield type and filtering devices used are dependent on the
customer’s application and system.
NOTE: Always use Shielded/Twisted Pairs for the Driver DC Supply Cable, the AC Supply
Cable and the Driver to Motor Cable.