Attero Tech DialogBox - Manual (Page 14)

DialogBox 4/2
User Manual
 Attero Tech LLC 2013 Page 9 614-00011-04
3.6.7 – Mute
The mute indicator warns the user whether this output zone has been muted by the activation of an appropriately
configured logic input. The indicator will turn red when the mute is active.
3.6.8 – H/W Boost (Analog Outputs 1 & 2 only)
The output boost applies to the output zone 1 and 2 local outputs only. An additional boost amplifier is implemented
in hardware directly after the DAC and can apply an additional gain to the local output signal. Selecting 0dB leaves the
amplifier off and audio will pass through unaltered. Selecting +10dB will activate the amplifier and apply a +10dB boost
to the analog signal.
3.6.1 – Meter
The meter shows a graphical indication of the current level of the zone output after all of the output zone DSP and
controls have been applied.