Attero Tech SquawkBox - Manual (Page 9)

SquawkBox
User Manual
 Attero Tech LLC 2014 Page 5 614-00007-04
3.4 – Load/Save Settings
In order to ease configuration of multiple SquawkBox devices, the settings may be
saved and that saved configuration then loaded into other SquawkBox devices.
Once all the parameters have been set correctly, the complete configuration can be
saved by clicking the Save button at the top of the form (as shown in Figure 4).
The Configuration Save dialog will appear allowing you to select a folder and a file
name. Clicking on OK will save the configuration using the chosen filename in the
chosen location. The filename will, by default, use a .DCF extension.
To load a previously saved configuration, click the Load button. The Load Configuration dialog will appear so the desired
configuration file can be located. Locate and select the file to be loaded and click OK. A confirmation message will then be
shown as a reminder that the current device configuration will be overwritten. Click “Yes” to continue.
*Note:
The saved configuration is very device specific so only SquawkBox configuration files can be loaded into a
SquawkBox. The revision of SquawkBox firmware is also taken into account. A warning will be shown and the file will not be
loaded if either the device type or the firmware revision does not match the device being set up.
Figure 4 - Save/Load Buttons