Attero Tech Box 4 I/OP - Manual (Page 15)

VoiceBox 4 I/OP
User Manual
 Attero Tech LLC 2010 Page 11 614-00008-02
3.3 – Matrix Mixer
The Matrix Mixer (shown in Figure 15) combines a number of controls. Each of the Local and CobraNet inputs are shown in
columns with the send controls running across in rows.
Figure 15 – Matrix Mixer Tab of VoiceBox Interface
3.3.1 – Matrix Mixer Input Controls
Each input has its own set of controls at the bottom of the column. There is an input fader that ranges from -100 dB to 0 dB
as well as “Mute”, “Invert” and “Solo” buttons.
Note: The Matrix Mixer input meters can only show the levels prior to entering the Matrix Mixer. Changing any of the Matrix
Mixer input controls will not affect the level of the accompanying input meter.
3.3.2 – Crosspoint Controls
Each input has a set of corresponding crosspoint knob controls which feed the audio (or a degree of it) to a particular
output. Each knob control ranges from -100 dB to 0 dB. Unlike other knob controls elsewhere on the form, there is no text
below each control. Instead, there is an edit box at the top right hand corner of the matrix. A single left click on a
particular crosspoint will show the control’s value in the edit box. This can also be used to type in a specific value for the
selected control.