BrandTech Scientific Transferpette S -8/-12 - Manual (Page 46)

➞
➞
➞
Z
➞ ➞
➁
➂
➃
➄
46
for cleaning or replacing
Removing of pistons
Disassembling the Manifold
1.
Disconnect the manifold from the
handle.
2.
Turn both closures of the manifold
housing cover 90° (e.g., using a coin)
and slide off the housing.
3.
Remove both outer Phillips screws on
the nose cone assembly.
Do not loosen the central guide
rod (Z)!
Attention:
4.
Pull the piston and nose cone as-
sembly apart and separate. Remove
stroke springs.
5.
Place the mounting tool on the pis-
ton nut and unscrew the piston nut.