Chemglass CG-15009-01 - Manual (Page 5)

5
Specifications:
Input Voltage: 120VAC, 50/60 Hz.
Output Range: 5% to 100% of rated voltage.
Maximum Output Power: 840 Watts +/-5% per channel.
Maximum Output Voltage: 120 VAC +/- 5% per channel.
Maximum Output Current: 7 Amps +/-5% per channel.
NOTE: THIS UNIT MUST ONLY BE USED WITH 120VAC RATED DEVICES, i.e. HEATERS AND MANTLES
Troubleshooting:
Problem Possible Cause Corrective Action
No Output/Heating Circuit Breaker tripped
on unit
Loose connections
Burned out element in
heater/mantle Depress white button on circuit breaker. NOTE: if
circuit continues to trip – Call for service
Ensure all connections are correct and secure
Plug an incandescent light into the power
controller’s output – if bulb lights, then the
heater/mantle is defective. – If the bulb does not
illuminate then call for service
Power switch does not
illuminate when turned
on Circuit Breaker tripped
on unit Depress white button on circuit breaker. NOTE: if
circuit continues to trip – Call for service