Chemglass CLS-3859 - Manual (Page 3)

Page 3
The CG Life Sciences Cell Production Roller Apparatus is designed for use in the production of
various attachment cells. The units are available in 106 (850cm²) bottle positions to provide
over 90,000cm² of surface area. Units have been engineered for maximum reliability. Our
rollers are formulated from a chemical resistant, non-slip EDPM rubber. All units feature a
solid state control with a heavy-duty maintenance free DC brushless motor. The entire frame
is powder coated aluminum for durability and cleanliness. All models also feature angled
rubber bumpers and rear guards. All Position Drive is standard on all units to prevent any
lightweight bottles from slipping.
Specifications:

Speed Range: 0.1 – 3.5 rpm

Dimensions CLS-3859-011 (HxWxD): 75 ¾ ”x 32 ¼” x 25 ½” (192.22cm x 81.9cm
x 64.8cm) including bumpers

Weight: 210 lb (95.25 kg)

Rating: CLS-3859-011, 115VAC fused at 2 amps, same with Alarm option and/or
Battery Back-up option

Rating: CLS-3859-011E, 240VAC fused at 2 amps, same with Alarm option
and/or Battery Back-up option
Features:
 Steel reinforced Polyurethane timing belts maintain durability and precise roller
rotation
 Unit retains last rpm set value when turned on
 Brushless DC
“maintenance free” Motor
 Accommodates standard roller bottles (110-120mm diameter)
Available Options:
 Battery Back-Up system – allows up to 36
hours of uninterrupted rotation should
there be a loss of power, or, if the unit needs to be moved without interrupting
roller rotation
 Rotation Alarm – Two motion sensors located at the last two rollers will depict
any stoppage in roller motion, sounding an audible alarm as well as illuminating a
red l.e.d on the front panel. A remote alarm output connector allows the user to
connect to an external alarm system.
Unpack the Roller Apparatus carefully. Be certain to retain the warranty information, all
packing material and operations manual(s). Record the serial number of the unit, located on
the side of the control box.
All damage claims must be initiated with the delivering carrier within five (5) days of
receipt of the product.
General Description
Unpacking Instructions
Example: Serial Number