Chemglass CLS-3859 - Manual (Page 4)

Page 4
This unit must only be connected to the correct voltage supply receptacle.
1. Versa-Roll
™ Roller Apparatus is shipped complete and ready for operation. With the
unit turned off (rocker switch in the “OFF” position), plug the power cord into an
appropriate outlet (one providing power at the rated voltage and frequency).
2. The Roller Apparatus can be locked into position by pressing down on the two locking
casters on the front of the unit.
3. Carefully position bottles between rollers with bottle cap facing towards front of unit.
4. Press the power switch to “ON” position. The display will illuminate indicating that the
unit is in operation. SEE FIGURE 2.
5. To operate, press the ( V- Λ) arrow
keys to select the desired the rpm’s -
the green
smaller display will change. Once the rpm value is obtained release the ( V- Λ) arrow key
and the display will flash for a few seconds and then store that value. SEE FIGURE 2
6. The white larger display will then adjust to the set value (ramp up or down).
Operating Instructions
Figure 1: Dimensional Overview Drawing