Chemglass AF-0304 - Manual (Page 24)

6. WARRANTY AND RETURN PROCEDURE
6.2. Return Shipment Procedure
If repairs are required, return the instrument with cables
and gauge tube to the manufacturer, pre-paid. Include a
purchase order and statement of the nature of the
problem.
22
The manufacturer warrants all instruments for a period of two
years against defects of material and workmanship subject to
the terms and conditions set forth below:
1. The warranty is in effect at date of shipment from the manu-
tacturer to the original purchaser.
2. Expendables such as gauge tubes, etc. are not covered by
this warranty.
3. Claims against this warranty for replacement parts and/or
service shall be limited to defects in materials and workmanship.
Malfunctions attributable to neglect, abuse, or repair and opera-
tional procedures not specifically recommended by the manufac-
turer are not warranted.
4. Service repairs and/or piece part replacement shall be war-
ranted for a period of ninety (90) days commencing on date of
return shipment or until expiration of the remaining term of origi-
nal instrument warranty, whichever is later.
5. The manufacturer shall not be liable tor consequential
damages nor for labor, loss or expenses directly or indirectly
arising from use of their products or equipment.
6.This warranty does not apply to shipping damage. Claims
for damage incurred while products are in transit rest with
purchaser. Said claims are to be levied against the carrier.
7. Amendments, assumed corollaries or statements contrary to
the terms of this warranty shall not be binding upon the
manufacturer unless stated in writing and approved by an officer
of the manufacturer.
8. THE MANUFACTURER MAKES NO OTHER WARRANTY,
EXPRESSED OR IMPLIED, AND MAKES NO WARRANTY OF
MERCHANTABILITY OR OF FITNESS FOR ANY PAR-
TICULAR PURPOSE.
9. Warranty service is F.O.B. point of manutacture. All trans-
portation charges to and from the manufacturer’s plant shall be
the responsibility of the purchaser.
6.1. Warrany Statement