EZ Dupe 5 Copy 3.5" SATA Hard drive Duplicator copies up to 60MB/s. Adapter is needed for 2.5 SATA HDD" - Manual (Page 12)

SATA HDD Duplicate Controller Manual
3.8.9 Auto Start Drive
This option is used to display to copy automatically once you insert HDD on target port.
8-09. Setup
Auto Start Drive
Press ENT to enter the following figure. The default is Off. Use the Up and Down arrow keys to
choose among 1-11.
3.8.10 Auto Start Timer
Auto Start Drive
Off
This option is used to display to copy automatically once you insert HDD on target port.
8-10. Setup
Auto Start Timer
Press ENT to enter the following figure. The default is Off. Use the Up and Down arrow keys to
choose 5 Sec-50 Sec.
Auto Start Timer
Off
3.8.11 Tolerance Size
This option is used to do to ensure that when the target is smaller than the source can not be
performed when the copy.
8-11. Setup
Tolerance Size
Press ENT to enter the following figure. The default is Off. Use the Up and Down arrow keys to
choose 1%~100% of source.
Tolerance Size
1% ( 4.7GB)
3.8.12 BootTime Delay
This option is used to to set boot delay time.
8-12. Setup
BootTime Delay
Press ENT to enter the following figure. The default is 5 sec. Use the Up and Down arrow keys to
choose 0~99 sec.
BootTime Delay
5 sec
11