Audiovox FD-250 - Manual (Page 4)

bl
AUTO-STORE SYSTEM (AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 6 stations pre-set into the memories of the radio
band in use. The unit will stop at each pre-set station for 5 seconds before continuing to the
next pre-set station (the pre-set number on the display panel will flash during this operation).
Press the button again momentarily to stop the Pre-Set Scan operation and remain on the
selected frequency.
Pressing the button for longer than 2 seconds will activate the Auto-Store System (AS) which
will automatically scan and enter up to 6 stations into the 6 pre-set memories on the band
in use. If you have already set the pre-set memories to your favorite stations, activating the
Auto-Store function will erase those stations and enter the new ones. This feature is most
useful when travelling in a new area where you are not familiar with the local stations.
bm
STATIONPRE-SETMEMORIES
To set any of the 6 pre-set memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down or Automatic Seek Tuning
Controls
9
.
3. Press the pre-set button to be set and continue to hold it in. The volume will be momentarily
muted and the pre-set number will appear on the display panel indicating that the station
is now set into that memory position and can be recalled at any time by pressing that pre-
set button.
4. Repeat the above procedure to enter stations in the remaining 5 pre-set memories on that
band and the 6 memories on each of the other 2 bands of the unit.
bn
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.
NOTE: It is characteristic of LCD panels that, if subjected to cold temperatures
for an extended period of time, they may take longer to illuminate than
under normal conditions and the visibility of the numbers may slightly
decrease. The LCD read-out will return to normal when the temperature
increases to a normal range.
bo
CASSETTEDOOR
Hold the cassette with the exposed tape edge to the right and insert it into the cassette door.
Depress fully until the cassette is engaged and begins playing.
When the cassette reaches the end of the side of the tape being played, the unit will
automatically change direction as shown by the arrow indication on the display panel and
play of the other side of the cassette will begin.
NOTE: Observe cassette cautions in the Care and Maintenance section of this
manual.
bp
FAST-FORWARD BUTTON (FF)
Pushing the Fast-Forward button will cause the tape to move rapidly in the forward direction
of play. To stop Fast-Forward movement, lightly push the Rewind button
bq
until the
mechanism disengages and normal play resumes.
-3-