Audiovox FD-250 - Manual (Page 7)

play of the disc will continue (“DISC” and “SCAN” will disappear from the display panel). The
Disc Scan mode will also be cancelled by activating any other disc function (Select, Cue,
Review, Shuffle or Repeat).
ct
TRACK/DISC REPEAT (RPT)
When the Repeat button
ct
is pressed, the “RPT” indication will appear on the display panel
and play of the selected track will be continually repeated until the Track Repeat mode is
cancelled by pressing the Repeat button
ct
again or by activating the Scan
cs
or Shuffle
cu
functions (“RPT” will disappear from the display panel).
When the Repeat button
ct
is pressed and held longer than 2 seconds, the “DISC” and “RPT”
indications will appear on the display panel and play of the selected disc will be continually
repeated. The Disc Repeat mode can be cancelled by pressing the Repeat button
ct
again
or by activating the Scan
cs
or Shuffle
cu
functions (“DISC” and “RPT” will disappear from
the display panel).
cu
TRACK/DISC SHUFFLE (SHF)
When the Shuffle button
cu
is pressed, the “SHF” indication will appear on the display panel
and the tracks on the disc will be played in a random, shuffled order. The Track Select button
cp
will also select tracks in the shuffled order instead of the normal progression. The Track
Shuffle mode can be cancelled by pressing the Shuffle button
cu
again or by activating the
Scan
cs
or Repeat
ct
functions (“SHF” will disappear from the display panel).
When the Shuffle button
cu
is pressed and held longer than 2 seconds, the “DISC” and “SHF”
indications will appear on the display panel and the discs in the magazine will be played in
a random, shuffled order as well as the tracks on each disc. When all the tracks on the
selected disc have been played, the next disc will be chosen in shuffled order and its tracks
will be played in shuffled order. The Disc Shuffle mode can be cancelled by pressing the
Shuffle button
cu
again or activating the Scan
cs
or Repeat
ct
functions (“DISC” and “SHF”
will disappear from the display panel).
ERROR SIGNS
If a problem should develop while operating the CD changer, the following error sign
indications may appear on the display panel.
E:01 Indicates abnormal disc changer function. Consult your car stereo
specialist or service facility for further assistance.
E:02 Indicates excessive temperature conditions. The error sign will go off and
play will resume when the changer temperature returns to the normal
range.
E:07 Indicates disc may be loaded in the magazine upside-down. Re-load disc
properly if necessary. May also indicate that the disc is dirty in which case,
clean the disc and re-load it. If this does not restore correct operation,
consult your car stereo specialist or service facility for further assistance.
- - - Magazine is not loaded in the changer.
0 0 0 No discs are loaded in the magazine.
1:- - No disc is loaded in magazine tray #1. (2: - - indication for tray #2, etc.)
-6-