Argox OS-214ZIP - Manual (Page 5)

Power Supply 1. The Power Adapter has a barrel connector on one end that
must be inserted into the power jack on the back of the printer.
2. Plug the other end of the cord into an appropriate AC electrical
outlet.
WARNING:
NEVER OPERATE THE PRINTER AND POWER SUPPLY IN
AN AREA WHERE THEY CAN GET WET.
3. When plugging the connector into power jack, please leave the
power switch at "O" position and don't touch the 36 pin parallel
connector.
AC Electrical Outlet
Power Jack
Power Switch
Cord
Barrel Connector
Power Adapter
OS-204/214/314
OS-202
3 4