Anton/Bauer DIONIC 90 - Manual (Page 6)

4
CHARGING DIONIC 90 BATTERIES
• DO NOT ATTEMPT TO CHARGE THIS BATTERY WITH ANY
CHARGER OTHER THAN THE ANTON/BAUER InterActive 2000
OR T SERIES CHARGERS SPECIFIED IN THIS MANUAL.
•Allow the battery to reach a steady green (LifeSaver
® ) mode before
using for the first time. Please read the individual charger Owner’s
Manual to become acquainted with the many unique operating
features of the chargers.
• The DIONIC 90 battery will be approximately 90% charged when the
LED’s on the charger indicate FLASHING GREEN. The battery is
100% charged when the charger indicates STEADY GREEN. The
Dionic 90 battery may be removed from the charger and discharged in
either condition.
•The Dionic 90 battery can remain on the charger until just prior to
being used. The LifeSaver (STEADY GREEN charger LED indication)
maintenance routine keeps the battery charged and ready for use. If the
battery will not be used for an extended period (more than 60 days) see
“Operating Guidelines” on page 11.
For best results this battery should be used or returned to the InterActive
2000 or T Series charger within 48 hours of being removed from the
charger.
Note: On some older chargers it may be necessary to install battery on
charger, wait one (1) minute, then remove battery and re-install. This
procedure may need to be repeated more than once to “wake up” a low
voltage battery.