Installation directions, Rj-45 plug pin1, Fold line on edge of door /drawer – HES 660 User Manual
Page 3
Installation Directions
DIAGRAM 6: HOOK BRACKET INSTALLATION
Align dotted line with outer edge of cabinet.
Tape Model 660 Mounting Template to inside
surface of cabinet.
Drill four 1/16” holes through paper template.
Model 660 Mounting Template
FOLD LINE ON EDGE OF DOOR
/DRAWER
FOLD LINE ON EDGE OF CABINET
MODEL 660
LOCK ASSEMBLY
RED +
BLACK -
LBSM WIRING*
White
Orange Normally Open
Green Normally Closed
Common
POWER WIRING*
RED
BLACK Negative
-
Positive +
*If applicable
*CAUTION! The Multi-Purpose Lock
Body is provided as either a 12 or 24
volt unit. Verify the power supply
output before operating this device.
White
Orange
Green
o O g B b G br BR
1 2 3 4 5 6 7 8
PIN4: LBSM (COMMON) - BLUE
PIN5: POWER (NEGATIVE) - BLUE/WHITE
PIN6: LBSM (NORMALLY CLOSED) - GREEN
PIN7: POWER (POSITIVE) - BROWN/WHITE
PIN8: LBSM (NORMALLY OPEN) - BROWN
Clip is pointed
away from you
RJ-45 PLUG
PIN1
DIAGRAM 3: MOUNTING TEMPLATE
DIAGRAM 4: POWER & LBSM SWITCH WIRING
RJ-45 OPTION
3