Kramer Electronics VP-441 - Manual (Page 16)

12 VP-441 - Controlling the VP-441
6.2 Using the OSD Menu
The control buttons let you control the VP-441 via the OSD menu. Press the:

MENU button to enter the menu
The default timeout is set to 10 seconds

ENTER button to accept changes and to change the menu settings

Arrow buttons to move through the OSD menu, which is displayed on the
video output
On the OSD menu, select EXIT to exit the menu.
6.2.1 The MAIN MENU
Mode Function
CONTRAST Set the contrast
The range and default values vary according to the input signal
BRIGHTNESS Set the brightness
The range and default values vary according to the input signal
FINETUNE Optimize the image quality (see Section 6.2.2 )
COLOR Set the red, green and blue shades (0 to 100, default 48, 48 and 52 respectively)
SIZE Select the size of the display: FULL, OVERSCAN, UNDER1, UNDER2,
LETTER BOX, PANSCAN, BEST FIT (default, FULL)
UNDER1 refers to an underscan of 6%
UNDER2 refers to an underscan of 9%
SOURCE Select the source: (default VGA)
Source input Appears as: Source input Appears as:
CV CVBS VGA PC
YC SVIDEO HDMI 1 HDMI1
COMP 1 YPBPR1 HDMI 2 HDMI2
COMP 2 YPBPR2
CVBS means Composite Video Baseband Signal
OUTPUT Select the output resolution from the menu (default NATIVE):
Output resolution: Appears as: Output resolution: Appears as:
1080i @60Hz 1080I60 800x600 SVGA
1080p @60Hz 1080P60 1024x768 XGA
576i 576I 1280x1024 SXGA
576p 576P 1600x1200 UXGA
720p @50Hz 720P50 480i 480I
1080i @50Hz 1080I50 480p 480P
1080p @50Hz 1080P50 720p @50Hz 720P60
1280x800 1280x800 1600x900 1600x900
1680x1050 WSXGA 2048x1080 @50Hz 2K50
1920x1200 WUXGA 2048x1080 @60Hz 2K60
1440x900 WXGA+ [email protected] 480I59