Kramer Electronics VP-690 - Manual (Page 8)

4 VP-690 - Overview
3 Overview
The Kramer VP-690 is a high quality presentation switcher and scaler. It accepts
one of nine inputs: one SD/HD/3G HD-SDI signal, two HDMI signals, two computer
graphics signals on 15-pin HD connectors, two composite video signals on RCA
connectors and two component video (also known as Y, Pb, Pr, Y, Cb, Cr and YUV;
compatible with both SD and HD component ) signals on RCA connectors. It scales
the video, embeds the audio, and outputs the signal to the HDMI output as well as
to a computer graphics output and an RGBHV video output together with a digital
audio output and an analog stereo audio output.
The VP-690 is HDTV compatible and the resolution can be up- or down-scaled as
follows: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, WXGA, WSXGA, WUXGA,
NATIVE, VGA, SVGA, XGA, SXGA UXGA, 1280x800, WXGA+, 1600x900,
2048x1080@50 and 2048x1080@60
The VP-690 Presentation Switcher/Scaler:

Has a video bandwidth of up to 2.97Gbps

Is SMPTE 259M, 292M and 424M compliant

Is HDCP Compliant - The HDCP (High Definition Content Protection) license
agreement allows copy-protected data on the HDMI input to pass only to the
HDMI output

Has analog audio inputs which include volume control, and digital (S/PDIF)
and analog stereo audio outputs

Automatically detects and selects the audio source for the HDMI input. Default
selection is HDMI – if this is not present, then the machine uses the audio
from the analog input

Comes with an On-Screen Display (OSD) for easy setup and adjustment,
accessible via the IR remote control and via the front-panel buttons

Has a non-volatile memory that retains the last settings used

Supports firmware upgrade via RS-232