Kramer Electronics VP-731 - Manual (Page 11)

Control Software - Defining the Control Software 9
Menu Sub Menu 1 Sub Menu 2 Description
Audio Properties Type Select the audio input type (available for
IN 1 to IN 2): Analog or S/PDIF
Loudness Set the loudness: On/Off
Delay Define the delay type: Dynamic or User
Define
Select Dynamic for the audio delay to
equal the pipeline video delay or User
Define to set the delay time manually
(via User Delay)
User Delay Available when selecting the User
Defined delay: 0 to 340 (msec)
Set the delay in 2msec steps
USB Select the audio signal to follow the
USB signal: No audio, input 1, input 2
HDMI 1 Select the audio source to be
embedded: HDMI 1
HDMI 2 Select the audio source to be
embedded: HDMI 2
Input volume Adjust the input volume: -22 to +22
Output volume Adjust the output volume: -100 to +24
Bass Adjust the bass: -36 to 36
Treble Adjust the treble: -36 to 36
Balance Adjust the balance: -10 to 10
Setup Store Setup memory 1 – 8
Recall Setup memory 1 – 8
About Displays the Control Software version
and Kramer company details
3.2 The Command Button Tool Bar
The following table describes the Control Software Command Buttons.
Button Button Name Description
Open Open an existing profile
Save Saves the input label configuration
Connect/Disconnect Connects or disconnects the controlled
device
Preset Full Switches to a full-screen output
Preset PIP Switches to a picture-in-picture output
Preset Pic+Pic Switches to a picture-and-picture output
Preset Split Switches to a split screen output
Freeze Window Freezes the output display
Set visibility of window Blanks/shows the output display