Kramer Electronics VP-731 - Manual (Page 9)

Control Software - Defining the Control Software 7
Main Window Features
# Feature Function
1 Menu Bar Bar containing all the menus used for configuration and
control. For an explanation of all menus, see
Section 3.1
2 Command Button
Tool Bar
Buttons used for saving and opening predefined setups,
connecting and disconnecting the device to be controlled
and selecting PIP settings. For an explanation of all
command buttons, see
Section 3.2
3 Input Switch Buttons Click one of the 9 input buttons to select a main input. The
selected input button turns green, see
Section 3.3
Note: The input switch button configuration is dependent
on the type of switcher connected
4 PIP Input Switch
Dropdown Click to choose the source of the picture to insert in the
PIP display, see
Section 3.4
5 Output Volume Slider Drag the slider up to increase the output volume; drag the
slider down to decrease the output volume. The volume
level is shown in the volume level indicator, feature 7, see
Section 3.5
6 PIP Preview Window This window shows how the PIP feature is configured
7 Volume Level
Indicator
Shows the output volume numerically from -100 to +28
8 Mute Checkbox Click this checkbox to turn off/on the output volume
9 Refresh Button Rereads and reloads the present main Input settings
10 Input Properties
Dropdowns The properties displayed depend on the input chosen, see
Section 3.6
3.1 The Menu Bar
The following table describes the Control Software menu bar options.
Menu Sub Menu 1 Sub Menu 2 Description
File Open Open an existing profile
Save Saves the input label configuration
Exit Exit the Control Software
Device Connect/Disconnect Connects or disconnects the controlled
device
Factory reset Returns the device to its preset default
settings
Refresh Refreshes the information on the screen
Panel Lock Prevents tampering with the front panel
buttons. Settings: On/Off
Panel Save Lock Select On or Off
Set to ON to save the lock status when
the machine is powered down
Panel Input Lock Select On or Off
Set to OFF so you can still use the
SOURCE buttons on the front panel
even when the lock button is on