Kramer Electronics VP-790 - Manual (Page 27)

VP-790 Warp Generator – Preparing a Grid 25
5.4.3.1
23B
Uploading via the Evaluator Controls Window
After updating/preparing the grid you can send it to the selected Warp Slot by
clicking the SEND button in the Send Warp area.
Figure 27: Sending a Map to a Slot
The warp map is now stored in one of the VP-790 Warp memories (from 1 to 8) and
appears as a warp file in the Warp files area in the main window. Once the Warp file
appears in the window, you can upload that Warp file into a different slot.