Kramer Electronics VP-790 - Manual (Page 9)

VP-790 Warp Generator – Warp Generator 7
# Feature Function
7 New Grid Open up the New Grid box and choose various parameters for
the grid
8 Edit Grid Open the selected grid file in the Grid Editor
9 Delete Grid Remove the currently selected grid file from the grid files folder
10 Browse Grid Files Open the grid files folder in the Windows Explorer; useful for
importing multiple files
11 Generate Grid from
Warp
Create a grid file from the warp file currently selected
12 Clear All Warps Delete all .twf files from the warp files folder
13 Browse Warp Files Open the warp files folder in the Windows Explorer; useful for
importing multiple files
14 Import Warp File Import a single .twf file into the warp files folder
15 Upload Warp To Unit Upload the selected warp file to the selected warp map slot on
the VP-790 (see
U
Section 5.4
U
)
16 Download Warp
From Unit
Download the warp files stored in the active warp map slot of
the VP-790 into the local warp files folder
17 Test Pattern On Set the VP-790 to display an internally generated test pattern
instead of a video signal to aid in warp creation
18 Test Pattern Off Switch off the internal test pattern.
The video signal previously selected is shown again
19 Download/Upload To
Slot X
Used to select which warp map slot (1-8) on the VP-790 that
the current warp file will be uploaded to or downloaded from
20 Warp Off Deactivate the warp engine of the VP-790. The warp map from
the active slot is disabled so the video image becomes regular
21 Warp On Activate the warp engine of the VP-790. The video image
becomes distorted according to the currently selected warp
map
22 Message History Display the history of the message box
23 Message box Display information about the current status of the warp
generator, commands and tool tips
24 Warp Files Box Display the files in the warp files folder
25 Current Grid Display the grid files in the grid files folder
4.2
7B
Grid Tools
The grid tool windows, Grid Designer and Evaluator Control appear when creating
or editing a warp map and are used to adjust the warp map to fit the screen’s
irregular surface.