Kramer Electronics FC-24ETH - Manual (Page 19)

Connecting the FC-21ETH, FC-22ETH and FC-24ETH 15
6 Connecting the FC-21ETH, FC-22ETH and
FC-24ETH
This section describes:

Connecting the FC-21ETH, FC-22ETH or FC-24ETH via Ethernet (see
Section 6.1 )

Connecting the FC-21ETH, FC-22ETH or FC-24ETH via RS-232 (see
Section
6.2
)

Connecting the FC-21ETH, FC-22ETH or FC-24ETH via RS-485 (see
Section 6.3 )
Always switch off the power to each device before connecting it to your
FC-21ETH, FC-22ETH and FC-24ETH. After connecting your
FC-21ETH, FC-22ETH and FC-24ETH, connect its power and then
switch on the power to each device.
In the following description, the FC-24ETH is used as an example. The same
principles apply to the FC-21ETH and FC-22ETH.
i