Kramer Electronics FC-24ETH - Manual (Page 27)

Operating the FC-21ETH, FC-22ETH and
FC-24ETH Remotely via the Web Pages
23
7 Operating the FC-21ETH, FC-22ETH and
FC-24ETH Remotely via the Web Pages
The embedded Web pages can be used to remotely operate the FC-21ETH,
FC-22ETH and FC-24ETH using a Web browser and an Ethernet connection.
Before attempting to connect:

Perform the procedures in Section
6.1
.

Ensure that your browser is supported (see Section 9 )
Note: The FC-24ETH is used throughout this chapter as an example. The same
principles apply to the FC-21ETH and the FC-22ETH.
7.1 Browsing the FC-24ETH Web Pages
To browse the FC-24ETH Web pages:
1. Open your Internet browser.
2. Type the device
’s IP number (see
Section
10
) in the Address bar of your
browser.
The Loading page appears followed shortly by the General Info page shown in
Figure 14 .
The General Info page displays the following:

Model Name

Firmware version

Device serial number

Web page version