Kramer Electronics WP-501 - Manual (Page 25)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the Control Room
18
4.1.2 The RC-4 Remote Controller – Compatible with SL-1, SL-10, SL-12 and SV-552
The RC-4 remote controller transmitter (see Figure 24 ) is used to control the RC devices in the
room 1
To activate a series of actions, point the transmitter at the front panel receiver of the room controller
device, or, alternatively, you can point the RC-4 at an external remote IR receiver available
separately (C-A35M/IRR-50). An extension cable, for an extended range of up to 60 meters is also
available (C-A35M/A35F-50).
. Each button on the remote control can trigger a series of actions that are defined by the
Kramer K-Config Software.
Figure 24: The RC-4 Remote Controller
1 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com