Kramer Electronics WP-501 - Manual (Page 37)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Triggers
30
Figure 47: Selecting the Command
The Description area specifies the action to be added to the action list
Figure 48: Action Description
5. Click the Add to List button.
The action is added to the Action List area (the name of the active trigger appears at the top of
the list):
Figure 49: The New Action in the Action List
6. Select the “Add New Action” line in the action list and repeat the above procedure to add
additional commands 1 :
Figure 50: The Action List
1 To replace a command, see Section 6.3 )