Kramer Electronics TP-107AVR - Manual (Page 3)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
Figure 6: RC-116 Presentation Controller 11
Figure 7: RC-108 Underside Panel 12
Figure 8: RC-116 Underside Panel 12
Figure 9: Connecting the XGA/Audio Line Transmitter/Receiver System 14
Figure 10: Connecting the TP-107AVR 15
Figure 11: Configuring the TP-107AVR/TP-122/RC-108 System 16
Figure 12: CAT 5 PINOUT 17
Figure 13: Wiring the RS-485 Connector 17
Figure 14: Rotary Switch Settings 18
Figure 15: Wiring to an RS-485 Controller 20
Figure 16: Connecting a PC without using a Null-Modem Adapter 24
Figure 17: Splash Screen 24
Figure 18: Atmel – Flip Window 25
Figure 19: Device Selection Window 25
Figure 20: Device Selection Window 26
Figure 21: Loading the Hex 26
Figure 22: RS-232 Window 27
Figure 23: Atmel – Flip Window (Connected) 27
Figure 24: Atmel – Flip Window (Operation Completed) 28
Tables
Table 1: Single Units 1
Table 2: BoardView™ Kit Options 1
Table 3: Connecting a Power Adapter to a System 2
Table 4: TP-107AVR XGA/Audio Line Transmitter Features 8
Table 5: TP-122 XGA/Audio Line Receiver Features 9
Table 6: TP-122 XGA/Audio Line Receiver (Underside) Features 10
Table 7: RC-108/RC-116 Presentation Controller Features 11
Table 8: RC-108/RC-116 (Underside Panel) Features 12
Table 9: CAT 5 PINOUT 17
Table 10: Rotary Switch Setting Features 18
Table 11: RS-485 Communication Protocol (Address Number 0 – 127) 21
Table 12: RS-485 Communication Protocol (Address Number 128 – 255) 22
Table 13: Remote PINOUT 22
Table 14: Technical Specifications of the TP-107AVR 29
Table 15: Technical Specifications of the RC-108/RC-116 29