Kramer Electronics RC-8RKL - Manual (Page 14)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Universal Room Controller
12
5.3 Using the Macro Buttons
Pressing any button initiates a macro sequence
1
, during which the button
blinks (as programmed by the system integrator).
If during the macro sequence the button blinks faster than usual
2
, this
indicates that a malfunction has been detected 3 and the RC-8RK exits the
macro sequence.
To solve the problem, summon technical help
4
If you want to stop a macro sequence, press and hold that button for 5
seconds. The sequence will come to an end. You can resume operation by
pressing any of the buttons 5 . The unit will carry out the macro sequence
commands from the beginning.
5.4 Using the Internal Web Page
The internal Web page can be used to remotely operate the RC-8RK via the
Ethernet.
To control your
RC-8RK via the internal Web page, do the following:
1. Type the unit’s IP number 6 in the Address bar of your browser (or type
any link defined by the system integrator).
The RC-8RK front panel is displayed on your screen (see Figure 10).
2. Press the on-screen buttons to control the unit.
Figure 10: Internal Web Page Front Panel
1 The macro sequence can be carried out instantly or can take a while, depending on the delay times included in the sequence
2 Six times per second, as compared with twice per second during normal operation
3 For example, a faulty DVD player
4 In this example, press the HELP DESK button
5 Including the button you kept pressed to stop the macro sequence
6 The default IP number is 192.168.1.39, and may be changed by the system integrator