Kramer Electronics FC-4001 User Manual
Page 9
Connecting Your FC-4001 Format Converter / TBC
7
6.1 Connecting a PC
To connect a PC to the
FC-4001 unit, using the Null-modem adapter
provided with the machine (recommended):
Connect the RS-232 DB9 rear panel port on the
FC-4001 unit to the
Null-modem adapter and connect the Null-modem adapter with a 9 wire flat
cable to the RS-232 DB9 port on your PC
Alternatively, to connect a PC to the
FC-4001 without using a Null-modem adapter:
Connect the RS-232 DB9 port on your PC to the RS-232 DB9 rear panel
port on the
FC-4001 unit, as Figure 2 illustrates
Figure 2: Connecting a PC without using a Null-modem Adapter
6.2 Dipswitch Settings
The
FC-4001 dipswitch settings are defined in Table 3, Table 4, and Table 5:
Table 3: Output Standard Settings
FUNCTION
DIP 1 DIP 2 DIP 3
SECAM with 9H ID
OFF
OFF
OFF
SECAM
ON
OFF
OFF
PAL
OFF
ON
OFF
PAL N
ON
ON
OFF
NTSC 3
OFF
OFF
ON
NTSC 4
ON
OFF
ON
PAL M
OFF
ON
ON
Same as the Input Standard ON
ON
ON
Table 4: Output Format Settings
FUNCTION
DIP 6
DIP 7 DIP 8
CV
OFF
OFF
OFF
CV with Pedestal
OFF
OFF
ON
Y/C
OFF
OFF
OFF
Y/C with Pedestal
OFF
OFF
ON
YUV
OFF
ON
OFF
RGB
ON
ON
OFF
RGBS
Any Value ON
ON