6 technical specifications, Table 6 defines the technical specifications, Technical specifications – Kramer Electronics TP-42 User Manual
Page 13: Table 6: technical specifications, Of the tp-41 / tp-42
Technical Specifications
11
6 Technical Specifications
Table 6 defines the technical specifications
1
:
Table 6: Technical Specifications
2
of the TP-41 / TP-42
TP-41: 1 set of component video (Y, U, V) on RCA connectors
1 S/PDIF (digital audio) on an RCA connector
INPUTS:
TP-42: 1 RJ-45 CAT 5 shielded connector (Line In)
TP-41: 1 RJ-45 CAT 5 shielded connector (Line Out)
OUTPUTS:
TP-42: 1 set of component video (Y, U, V) on RCA connectors
1 S/PDIF (digital audio) on an RCA connector
MAX. OUTPUT LEVEL:
VIDEO: 2.1Vpp
AUDIO: 2.1Vpp (S/PDIF)
BANDWIDTH (-3dB):
VIDEO: 57MHz
3
, Fully Loaded AUDIO: 53.4MHz
3
DIFF. GAIN:
0.15%
DIFF. PHASE:
0.68 Deg
K-FACTOR:
0.8%
S/N RATIO:
VIDEO: 78.1dB
AUDIO: 78.4dB
CROSSTALK (all hostile): VIDEO: –55.5dB
AUDIO: –50.5dB
TP-41: YUV Level: –1.7dB to +0.7dB
S/PDIF Level: –1.9dB to +0.4dB
CONTROLS:
TP-42: YUV Level: –0.7dB to +0.8dB
YUV Equalization: 0 to +7.5dB
S/PDIF Level: –0.5dB to +1.2dB
S/PDIF Equalization: 0 to +7.8dB
COUPLING:
VIDEO: DC
AUDIO: DC
TP-41: 12V DC, 95mA
POWER SOURCE:
TP-42: 12V DC, 82mA
DIMENSIONS:
TP-41 / TP-42: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" 0.98", W, D, H)
WEIGHT:
TP-41 / TP-42: 0.3kg (0.67lbs) approx.
ACCESSORIES:
Power Supply
1 Specifications for 100m of CAT5 UTP cable, unless otherwise specified
2 Specifications are subject to change without notice
3 At 30m