1 features 1.3 chest belt installation 3, 2 package contents a b, 4 sync setup – Acumen Ergo Pro User Manual
Page 3
1.1 Features
1.3 Chest Belt Installation
3
Attaching Your Chest Belt
A. Ergo Pro Watch
B. 2.4 GHz ANT+ Conductive Fabric Chest Belt
C. Instruction Manual
4
H
EART
R
ATE
M
ONITORING (HRM)
2.4 GHZ ANT + Sport Digital HRM
Conductive Fabric Chest Belt
Current / Average / Maximum HR
EZ - Set Target Zone with Visual & Audible Alarms
Time Above / Within / Below Target Zone
In - Zone - Goal Count Down Timer (5-60 minutes)
Average HR Per Lap
T
RAINING
Free Training
Lap Training (50 laps)
Interval Timers
F
ITNESS
Fitness Index
Programmable Exercise Type
Calorie Counter
S
TANDARD
F
EATURES
Daily Alarm
Clock / Date / Day Display
NiteLite with SmartLite
Scratch Resistant Crystal Lens
Water Resistant to 30 Meters
1.2 Package Contents
A
B
t
n
e
m
e
c
a
l
p
e
R
y
r
e
t
t
a
B
w
e
r
c
s
n
U
w
e
r
c
S
.
1
.
.
4
s
s
e
r
P
s
s
e
r
P
s
s
e
r
P
s
s
e
r
P
Moisten both strips of conductive fabric on the
chest belt.
2. Insert the two pins at the back of the transmitter
into the two mounting holes on the Conductive
Fabric Chest Belt.
3. Push the transmitter downwards to lock the
transmitter in place. (See the picture on the left).
Check and adjust the tension of the Elastic Strap
to ensure that the conductive fabrics fit tightly
against your skin.
1
Remove the transmitter from the Conductive
Fabric Chest Belt.
2. Use a coin to open the battery door.
3. Replace the used battery with a new battery.
The watch does not have to be worn on your wrist to register your heart
rate, but it must be within 3 feet from your Conductive Fabric Chest Belt.
1.4 SYNC Setup
Before you start training, enter
SYNC Setup under Set Mode to synchronize the
heart rate chest belt with the watch as described in section 2.6.
Note: