WIKA CPC3000 - Manual (Page 32)

Pneumatic High-Speed Pressure Controller CPC3000
WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1 
11498171.01 08/2009 GB
7.8.1 SETUP Display
The MAIN -> SETUP -> DISPLAY menu contains elements that change the appearance
and function of components displayed on the main menu. Following is a description of the
elements of this menu.
Filter: The filter selection keys [LOW], [NORMAL], and [HIGH] dampen the pressure
display to reduce the affect of pneumatic noise associated with the device under test or the
test environment.
Resolution: The resolution section of the SETUP Display menus allows the user to change
the resolution of the current pressure reading to be
[4], [5] or [6] digits.
Stable Window and Delay: The stable window is the percentage of the full scale value
of the internal sensor that the current pressure can deviate (+/-) from the setpoint and still
display a stable indication. The stable delay is the number of seconds that the instrument
must remain within the stable window before the stable indication is displayed.
Language: The "VIEW" section of the SETUP display menu shows a flag, a country and a
language on a key. This is the current language. Press this key to access a menu containing
other languages that are available. "Figure - Languages" below shows the language selec-
tion screen.




Remote Status Checkbox: The Remote status check box enables or disables the remote
status icon on the main menu. This icon will show a broken wire when there is no connec-
tion to a remote computer or a connected wire if the computer is connected.
Barometer (optional): The Barometer check box enables or disables the indication of the
barometric pressure on the main menu.


Figure - Languages