WIKA Pascal 100 - Manual (Page 67)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 67
GB
6.5.8 Ramp Menu
This menu is displayed when the parameter are associated to an ouput card.
This function allows to set a ramp that automatically shift the generated value in configurable
steps. If both generation outputs are available, each one associated to a channel, two ramps can
be set up and can be run simultaneously. Ramp can be programmed as per below:
Figure 74 – Ramp profile
Press RAMP:
Figure 75 – RAMP Menu