WIKA Pascal 100 - Manual (Page 69)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 69
GB
6.5.9 Disk Menu
Data related to the Reports, Loggings and Calibration procedures are stored as files into the
internal memory of the equipment.
Press Menu DISK, and the following options will be displayed:
Figure 79 – DISK Menu
FORMAT
allow to cancel completely the virtual DISK. This operation will cancel all the store
data. Before proceeding the instrument will ask a final confirmation to the operator.
DEFRAG
this operation may be required when many data are created and deleted
continuously. Inside the internal memory of the Disk, in fact, empty spaces could
be generated: this may lead to a warning message related to the shortage of the
memory and the impossibility to store new data. To recover this space, please
proceed with the Defrag: the existing data will not be lost but a certain time is
required to complete the procedure.
6.6
Measurement Channel
When a measure is displayed, the ENG.UNT will appear.
Figure 80 – Main screen