WIKA PU-448 - Manual (Page 6)

GB
6 WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
2. Specifications
Specifications Model PU-448
Software
USB interface USB connector type A to 9-pin sub-D
connector
Electrical parameters
Voltage supply The PU-448 and therefore also the
connected transmitters/resistance
thermometers are powered through the
USB port. Thus no additional voltage supply
is needed.
Power supply 100 mA @ +5 V, via USB port
Connection to computer USB connector
Connection to transmitter ■ 2 x banana plugs Ø 2 mm
(with magWIK quick connector)
■ Adapter cable for M12 connector
■ Adapter cable for angular DIN connector,
form A
Output voltage Max. 18 V
Ambient conditions
Operating temperature 0 ... 50 °C
Storage ■ Temperature -40 ... +85 °C
■ Humidity 0 ... 95 % relative humidity
Dimensions
■ Case 75 x 33.3 x 15 mm, ABS industrial case
■ Test clip cable 2 m (2-wire)
For further specifications see WIKA data sheet AC 80.16 and the order
documentation.
2. Specifications