ATI Technologies Radeon X600 - Manual (Page 29)

ATI Overlay Tab 23
Clone Mode Settings
Clone Mode Options are available under the following conditions:
• Your ATI graphics accelerator has dual controllers to support
Primary and Secondary (Clone) displays.
• Your ATI video adapter has dual display functionality by providing
a standard VGA connector and a digital flat panel connector such as
the DVI-I connector.
In either of these cases, you can access Clone Mode Options if more than
one display is connected.
Note: These settings apply to video content viewed when you are in
dual-controller Clone mode, and not single-display or extended
desktop configurations.
ATI Overlay Tab
Brightness Adjusts the brightness of the video image.
Contrast Adjusts the contrast in the video image.
Saturation Adjusts the vividness of the color. Sliding it all the way to
the left removes all color and produces a black and white
picture.
Hue Adjusts the pureness or tint of the red, green, and blue
components of the color.
Gamma Adjusts the overall intensity of the video image.
Clone mode
options Accesses Clone Mode overlay settings.These settings
only apply to video content when viewed in dual-controller
Clone mode. For more information, see the Clone Mode
Settings section.
Defaults button Resets the Overlay settings to default values.
Theater Mode Displays video playback in full screen on a secondary
monitor, if available and enabled.