ATI Technologies Radeon X600 - Manual (Page 46)

40 How TV Display Cannot Be Used
Increasing the contrast of a TV display
1 Access the Display Properties dialog by right-clicking on the desktop
or navigating through Windows®
Control Panel .
2 Click on the Settings tab and then the Advanced button.
3 Click on the ATI Displays tab.
4 Click on the TV button.
5 Drag the Contrast slider to the right to increase the contrast.
6 Click OK or Apply to save the changes you have made.
Using TV Display Alone
If you plan to move your computer to a place where you are using TV
display only, make sure that you have the TV display feature enabled prior
to removing the monitor.
The maximum display resolution for TV is 1024x768. Choosing a
resolution higher than this will cause the TV display to disappear if it is the
only display device.
Using Games and Applications
Some older games and applications may program your RADEON™ X600
directly to run under a specific display mode. This may cause your TV
display to turn off automatically or become scrambled (the PC monitor will
not be affected). Your TV display will be restored once you exit the game
or if you restart your computer.
Select your TV broadcast format
1 Click Start, point to Control Panel
2 If your Control Panel is in Category View:
Select Appearance and Themes, then click Display icon .
If your Control Panel is in Classic View:
3 Double-click Display.
4 Click the Advanced button.
5 Click the Displays tab.
6 Click the TV button.
Your TV must be enabled before you can change its display
properties.