ChocoVision REVOLATION X3210 - Manual (Page 5)

* Install the removable BOWL RING onto the lip of the
bowl opening in your machine.
* Place the BOWL in your machine and rotate it
until it drops into place.
* Attach the SCRAPER to the BAFFLE (Fig. 1). When
properly installed, the SCRAPER should curve towards
the front of the machine.
* Fit the BAFFLE into the BOWL, insuring that the
probe contacts (CASE and BAFFLE) are aligned.
Thread the BAFFLE KNOBS onto both BAFFLE MOUNTS.
If the BAFFLE is not installed properly, the machine
will sound an audible warning, and will not start.
* Snap in the BAFFLE CLIP. This helps the solid
chocolate from climbing out of the bowl as it
rotates.
O P T I O N A L H O P P E R A C C E S S O R Y
* Slide the HOPPER assembly into the DUST COVER
opening (Fig. 2) and load with up to 10 lbs of
chocolate. Any type of chocolate can be used, but
solid block chocolate works best.
* Note that chocolate is always loaded behind the
BAFFLE.
* All HOPPER components can be disassembled
for easy cleaning.
F i g . 1
F i g . 2
N O T E : B E F O R E U S I N G Y O U R M A C H I N E , W A S H A L L C O M P O N E N T S T H A T M A Y C O M E I N
C O N T A C T W I T H C H O C O L A T E . U S E A S O F T S P O N G E O R C L O T H A N D M I L D S O A P .
-4-
A S S E M B L Y