Altinex DAV0106-V1A2 - Manual (Page 3)

DISTRIBUTION AMPLIFIERS
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
DAV0106-V1A2 Distribution Amplifier. Keep this
manual handy for future reference. These safety
instructions are to ensure the long life of your
DAV0106-V1A2 and to prevent fire and shock
hazard. Please read them carefully and heed all
warnings.
1.1 GENERAL
•
Unauthorized personnel shall not open the unit
since there are high-voltage components
inside.
•
Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2 SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE DAV0106-V1A2
•
Maximum operating ambient temperature is 35
(degrees C).
•
Never restrict the air flow through the devices’
fan or vents.
•
When installing equipment into a rack,
distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
•
Connect the unit to a properly rated supply
circuit.
•
Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3 INSTALLATION
•
For best results, place the DAV0106-V1A2
Distribution Amplifier on a flat, leveled surface
in a dry area away from dust and moisture.
•
To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
DAV0106-V1A2 Distribution Amplifier in direct
sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
•
Handle the DAV0106-V1A2 Distribution
Amplifier carefully because dropping or jarring
can damage internal components.
•
Do not place heavy objects on top of the
DAV0106-V1A2. If the is to be mounted to a
table or wall, use only Altinex made mounting
accessories, such as rack mount shelf
(DA1293FC, DA1294FC) and cables for
optimum setup.
•
To turn off the main power, be sure to remove
the cord from the power outlet. The power
outlet socket should be installed as close to the
equipment as possible, and should be easily
accessible.
•
Do not pull the power cord or any cable that is
attached to the DAV0106-V1A2 Distribution
Amplifier.
•
If the DAV0106-V1A2 Distribution Amplifier is
not used for an extended period, disconnect the
power cord from the power outlet.
1.4 CLEANING
•
Unplug the DAV0106-V1A2 power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents, such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
•
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant, to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may