KWorld M120 - Manual (Page 8)

M120
7
TWO
Activating media player
Once you have properly set up the media player following the instructions on the
Connection Diagram section, please turn on your TV to enter the main menu screen..
It is suggested that you plug your USB storage device before turning on your TV so
that you can see the function icons such as “Movie” and “Music”.
Switch the video source of your TV. Your TV comes with multiple video source such as
TV, AV, Components, HDM, VGA and/or so on. Please switch to the correct source. For
instance, if you connect the media player to TV through YPbPr cables, please switch
the video source of the TV to “Components”. You may do that with the buttons on your
TV remote or buttons on the television.
Use the arrow keys on the remote to select “Setting” and press “OK” to enter.
You will see a list of items once you have entered the “Setting” page.
The items include “Output”, “Language”, “Audio Output”, “Subtitle and lyric codec”,
“System Information” and “Restore default”.
1.Once your Media player M120 power is on, it
will automatically display the main menu page
on your TV as the picture shown below. Please
use the left and right arrow keys to move
toward “settings” and press the OK key on
the remote to select “setting”. Right after, you
will see a list of items once you have entered
the “Setting” page. The items include output,
language, audio output, subtitle & lyric codec,
system information and restore default.
2.Once you are in the setting options page
please switch the video output standard for the
media player. Please press OK on your remote
to select “output”, and press the arrow keys to
view the different outputs, and then select your
desired output by pressing OK on your remote.
The outputs will be switched every time you
Output
Setting
press the arrow key in the following order: VGA, PAL, NTSC, 480P, 720P(50HZ),
720P(60HZ), HDMI-720P(50HZ), HDMI-720P(60HZ), HDMI-1080I(50HZ), HDMI-
1080I(60HZ), HDMI-1080P(50HZ) and HDMI-1080P(60HZ).