Activating the media player – KWorld M102 User Manual
Page 8
© 2010 KWorld
8
TWO
Activating the Media Player
1. Once you have followed the steps above (in the Connection Diagram for YPbPr or the
Connection Diagram for HDMI section) to set up the media player properly, please turn
on your TV.
2. When you turn on your TV, you must switch the “VIDEO” source for your TV FIRST.
You can either do it with the remote or the buttons on your TV set.
3. You may see a picture like the one below on your TV screen.
Tip: your remote should have a button with a function like the video source switch, as
the picture shown below.
Tip: choose “Component” if you connect the media player unit to a TV with YPbPr
cables. Select “HDMI” if you connect it with a HDMI cable.
Note: this picture is for reference only
Note: this picture is for reference only
The video input
button to switch
video source