Revolabs HD Single & Dual Channel System — Tandberg C20 User Manual
Revolabs Equipment
Revolabs HD Single / Dual Channel System — Tandberg C20 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs HD Single or Dual Channel System to a Tandberg C20 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Revolabs Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs HD Single or Dual Channel System
2. Tandberg C20 video codec
3. QTY 1 3.5mm balanced male to 3.5mm TRRS cable*
* 07-35MBTO35M4-01 3.5mm balanced male to 3.5mm TRRS male cable
available from Revolabs
NOTE:
IMAGES
ARE
PART
OF
THE
T
ANDBERG
C
ODEC
C20 A
DMINISTRATOR
’
S
G
UIDE
© J
ULY
2009