Revolabs HD Single & Dual Channel System — Tandberg Edge 75/85/95 User Manual
Page 3
Advertising
Configuring the Tandberg Edge 75/85/95 Video Codec
1. Go to AUDIO SETTINGS
2. Select INPUTS
4. Adjust the audio Input Type Level if
necessary (Recommend +8dB)
5. Speak into the Revolabs microphone
that is connected to MIC 1. The
audio meter should peak at about
5dB for normal speech.
6. Return to previous menu and select
ECHO CONTROL
7. Enable MIC 1 Echo Canceller
(ON)
8. Return to previous menu and select
AUDIO LEVELING (AGC)
9. Turn MIC Audio Leveling (AGC)
OFF
3. Confirm that MIC 1 is ON
NOTE:
IMAGES
OF
SET
UP
SCREENS
ARE
DEFAULT
SETTINGS
FROM
T
ANDBERG
AND
ARE
PART
OF
THE
T
ANDBERG
MXP A
DMINISTRATOR
’
S
G
UIDE
©
M
AY
2008
Advertising