Revolabs Fusion Setup Guide - Manual (Page 3)

Revolabs Fusion™
Page 3
Great audio, wireless mobility, and simple to install!
Simply plug the cable into the AV system or phone system and it
works. No software configuration is necessary. Even the Fusion
box is designed to be easy to use– vertically or horizontally. No
equipment rack needed. Just set the Fusion system on the
credenza.
Video Conferencing
Revolabs Fusion Wireless Microphone Solution is compatible with
all of the major video-conferencing solutions, including Lifesize,
Polycom, Sony, and Tandberg. It includes a remote control to
control the sound volume. Decide on where you want to put the
Fusion system, whether you want to place it vertically or
horizontally, plug in the cables and you are ready to have great
wireless audio in any conference room.
Audio Conferencing
Plug the Fusion Wireless Microphone Solution into an analog
telephone jack and you are on your way to great wireless
teleconference calls. There is a remote control dialer to dial the
conference phone number. You may connect to powered speakers,
connect to existing speaker system or connect to a new room
speaker system to hear the call. Decide on where you want to put
the Fusion system, whether you want it vertical or horizontal, plug
in the cables and you are ready to have great wireless audio in any
conference room.
Flexible
The Fusion System supports any combination of Solo Wireless
Microphones- Wearable, Tabletop, or XLR adapter for a handheld
microphone. Choose the right microphone for your meeting
dynamics.
Rechargeable
Revolabs Wireless Microphones have a rechargeable battery that
provides up to eight hours of talk time after each full charge.
Revolabs Wireless Microphones recharge to 85% capacity in
approximately 45 minutes.
Secure
All of Revolabs Wireless Microphones use 128-bit authentication,
so that no one can listen in.