Revolabs Fusion Microphone System — Polycom IP 7000 - Manual

Revolabs Fusion TM Microphone System — Polycom IP 7000 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Fusion Microphone System to a Polycom IP 7000 Speaker Phone.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion Microphone System and/or the phone may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Fusion 4 or 8 channel Microphone System
2. Polycom IP 7000 Speaker Phone
3. Polycom SoundStation IP Multi Interface Module (P/N 2200-19300-001)
4. QTY 2 RCA male — RCA male cable
5. Amplified Speakers