Revolabs Fusion Microphone System — Polycom IP 7000 - Manual (Page 3)

Configuring the Polycom IP 7000 Speaker Phone
1. Press the MENU button
2. Scroll down to SETTINGS (3)
3. Select BASIC (1)
4. Scroll down to AUDIO (5)
5. Select AUXILIARY AUDIO (2)
6. Select AUX AUDIO IN (1)
7. Verify that OTHER INPUT (2) is active
8. Return to previous menu by selecting BACK
9. Select AUX AUDIO OUT (2)
10. Verify that EXTERNAL SPEAKER (2) is active
NOTE: You must use your Fusion remote control to control the room volume
for both the audio conference calls. Adjusting the volume in the phone will
cause echo.