Revolabs Single Channel System - Polycom VSX8000e - Manual (Page 2)

Connecting the Cables
C
ONNECTING A REVOLABS
S
INGLE
C
HANNEL
S
YSTEM TO POLYCOM VSX
8000
E VIDEO CODEC
1. Connect a Revolabs 2.5mm to RCA audio cable between the 2.5mm analog
output on the Single Channel System and the red “LINE INPUT” Phoenix
connector on the VSX8000e.
Configuring the VSX8000e Video Codec
C ONFIGURING THE AUDIO MENUS OF THE VSX8000 E VIDEO CODEC
1. Select SYSTEM
2. Select ADMIN SETTINGS
3. Select AUDIO
4. Set INPUT TYPE to LINE INPUT
5. ENABLE Echo Canceller
6. DISABLE Polycom microphones by removing checkmark on ENABLE
POLYCOM MICROPHONES