Revolabs XTAG USB - Manual (Page 5)

-5 -
System Components System Components System Components System Components
Your Revolabs xTag™ System package contains:
• Compact Charger Base
• Wearable xTag wireless microphone
• Earpiece with volume control
• Quick release lanyard
• USB cable
• Installation and Operation Guide
• xTag Quick Start Guide
Revolabs Revolabs Revolabs Revolabs xTag xTag xTag xTag™ ™ ™ ™ Charger Base Charger Base Charger Base Charger Base
Use the Charger Base to store and charge the
Microphone when not in use. The Microphone must be
properly inserted into the base and seated flush for
charging to occur.
1. Charger Bay — charges Microphone
2. LED indicator — mute and pairing status indicator
3. MUTE button — duplicates the Microphone mute function
4. Mini USB connector — computer audio and power connection
2
3
1
4
-6 -
Mute Button
Pressing the MUTE button toggles between muting
(flashing RED LED status) and un-muting (flashing
GREEN LED status) on the Wireless Microphone.
Note: Press the MUTE button on a Microphone will
similarly toggle between mute and un-mute and display
on both status LEDs.
USB Connection
Use the supplied cable to connect the mini USB
connector to the Charger Base and the standard end
to your computer USB port.
Installing the Installing the Installing the Installing the xTag xTag xTag xTag USB USB USB USB System System System System
The xTag USB system is easily installed in the home or
office. Simply follow the instructions below to attach
the unit to your equipment.
Computer Software Set-up
Use the supplied USB cable to connect the mini USB
connector to the Charger Base and the standard end