Axis Communications 262+ - Manual (Page 4)

Page 4 AXIS 262+ Installation Guide
AXIS 262+ Overview
Connect the cables
1. Connect the video recorder to the network using a shielded network cable.
2. Optionally connect external input/output devices, e.g. alarm devices. See page 8 for
information on the terminal connector pins.
3. Connect power, using supplied power adapter.
4. Check that the indicator LEDs indicate the correct conditions. See the table on page 10
for further details.
Front panel
Power indicator
Network indicator Status indicator
Disk indicator
Rear panel
Power
connector
9-pin I/O terminal
connector
Network
Serial number
Power button
connector
Factory setup
button
adapter
RS-232
connector