Rock Band Wireless PRO-Drum and PRO-Cymbals Kit Rock Band 3-Nintendo Wii - Manual (Page 3)

[4] [5]
1
2
3
thu
mb screw
A. B. C.
wing nuts
A.
A.
B.
C.
A Drum Pads
B Drum Stick Holder
C System Controller
D Adjustable Clamp
E Foot Pedal
TM
Color-coded plugs for cymbal cables
on back of Rock Band 3 drum kits
General Setup
1. Interlock interior clamp around ridge support on drum leg assembly (Fig. 2).
2. Tighten thumb screws to secure to leg clamp of drum kit.
3. Quick-release clips snap securely into place.
4. Insert metal poles and adjust height (Fig. 1).
5. Tighten thumb screws of metal poles (Fig. 2).
6. Add cymbal to pole based on cymbal configuration.
7. Screw on appropriate color wing nut (do not tighten completely if you want cymbal to tilt forward).
8. Loosen thumb screws that hold metal pole and rotate pole so that the cymbal is oriented to your style of play.
9. Retighten thumb screw that holds metal pole.
9A. (Optional) Loosen thumb screws around drum kit legs to rotate and adjust position of metal poles to
drum heads and retighten screws.
10. Connect cymbal cables to drum kit. Match cymbal color to cable jack.
TIP: Wrap cymbal cables around metal poles for cable management.
Color-coded wing nuts let you designate cymbals to preferred style of gameplay.
Foot pedal
Additional foot pedal.
Sold separately.
Fig. 2
Fig. 3
(D.)
Fig. 1
Blue Green Yellow Red
Cymbal configuration:
A. Yellow = Hi-Hat Cymbal
B. Blue = Ride Cymbal
C. Green = Crash Cymbal
D. Red = Crash Cymbal
(Lefty Mode)
A A
E
A A
B B
C D D
1
2
3
4
5
6
7
8
USB Dongle
Press button to connect
Wing nuts