Step 4 - connecting the ais transceiver, Figure 8 position of the ais transceiver connector, Figure 8 – Seiwa Si-Tex MDA3 User Manual
Page 15: Position of the ais transceiver connector
Advertising
Page 12
Installation
Step 4 - Connecting the AIS transceiver
Using the AIS transceiver accessory cable provided with this product, route the cable from the AIS transceiver to the AIS antenna
splitter and connect to the AIS transceiver connector on the AIS antenna splitter as shown in Figure 8. If the cable supplied is not long
enough please contact your dealer for details of suitable extension cables.
A fully approved marine AIS class B transceiver or AIS receiver should be used with this AIS antenna splitter and requires a SO239 VHF
antenna connector to connect to the AIS antenna splitter using the supplied accessory cable.
Figure 8
Position of the AIS transceiver connector
Power and FM
VHF antenna
VHF radio
AIS transceiver
Advertising